Commodore 64 Repair
I always take the lid off and inspect before power on.. You never know what you might find.
Can you spot whats wrong here?
Removed before power up.
Anywho, it turned out that the PCB isn't as bad as the Sinclair boards. The tracks on those things lift if you just look at them.
I installed a socket so I could test different memory chips as I've got a handfull I removed from another machine
For a quick test I plugged in a cartridge.. All good.. Well no..
I stopped taking photos for a bit at this point. You see, I plugged my test hardness into the C64 to check out its ports with the new 6526 and it popped a fuse! If you power on the machine with the userport and the cassette port plugged in it popped! It loaded fine from tape, ran a cart, and the keyboard and disk interface tested ok, as long as you didn't have both connectors plugged in at the same time. Hummmph
So thats why I had to remove the other 6526 so I could test it in another system. Gave me a chance to clean up from 1988's champion of burnt flux. I also changed a 4066 @U28 as that had failed a test and was easy to swap for a new one.
The bad news was it is still popping fuses at this point.
Happy days, my hunch was correct. No more popped fuses, and the diagnosting harness and cartridge no longer reports spurious faults!
Four chips replaced (red dots), the 4066 wasn't faulty but I'm not about to remove it for fun. Added heatsinks to keep those chips alive for a bit longer! Do this to your SID, before it overheats and dies!
C64 back in its lower case. Those with working eyes may notice that I changed all the capacitors. This machine had a .9 volt ripple on the 5v line. You should always install new caps in this old stuff.. It was more than likley to have been the cause of these faults in the first place. The hotter it got the more rippley the voltage became.
Disk 2 loading.. Disk swapping on a 1530, available from all good retailers!
Worth the hassel? I think so, the owner of this C64 bought it brand spancing new back in 83ish. All it needed was a 6526 one 4164 a 6510 and a bunch of capacitors and someone mad enouth to fix it!
It's sooo good. Clyde wanted to do a little dance.