The Future was 8bit

Atari 2600 6 Switch PAL Composite Mod

Atari 2600 6 Switch PAL TFW8b Composite Video Mod

Atari 2600 6 Switch PAL Composite Video Mod

Step 1 - Remove Modulator

Atari 2600 6 Switch PAL Composite Video Mod

Step 2 - Remove R209, Q202, L201 & R216

 Atari 2600 6 Switch PAL Composite Video Mod

Step 3 - Connect the audio (BROWN) Cable

Atari 2600 6 Switch PAL Composite Video Mod

Step 4 - Route the BROWN audio cable out the back of the box

Atari 2600 6 Switch PAL Composite Video Mod

Step 5 - Pin 1 Green, 3 Red, 4 Yellow - Fix the mod PCB with a sticky pad or hot glue

Atari 2600 6 Switch PAL Composite Video Mod

Step 6 - Route the new cable the same as the orginal cable. This may need fixing with HOT Glue or a cable tie if loose